Middleby Marshall Model PS536 User Manual download pdf (Page 16)

ENGLISH

A. DAILY STARTUP PROCEDURE

3. Turn the "CONVEYOR"

(

) switch to the ON

("I") position.

4. If necessary, adjust the

conveyor speed setting

by pressing the

pushbuttons on the con-

veyor speed controller to

change the displayed

bake time.

6a. Check that the "1" light

illuminates. This shows

that the burner or heating

elements have been

turned on.

The "2" light will illumi-

nate while the oven heats

to its minimum normal

operating temperature of

200°F/93°C.

II. NORMAL OPERATION - STEP-BY-STEP

SECTION 3 - OPERATION

2. Turn the "BLOWER" ( )

switch to the ON ("I")

position.

5a. Press the

pushbuttons on the digi-

tal temperature control-

ler to adjust the set tem-

perature, if necessary.

Note that the set tempera-

ture is shown in the lower

window of the display,

while the actual oven

temperature is shown in

the upper window.

1. Check that the circuit breaker/fused disconnect is in the on

position. Check that the window (if so equipped) is closed.

Actual

temp

Set

temp

7a. Wait for the oven to heat to the set point temperature. Higher

set point temperatures will require a longer wait. The oven

can reach a temperature of 500°F (232°C) in approximately

15 minutes.

8a. Allow the oven to preheat for 10 minutes after it has reached

the set point temperature.

Heating

elements on

Oven

temperature

under 200°F/

93°C

If the oven uses this

Digital Temperature

Controller:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Comments to this Manuals

No comments

Middleby Marshall Model PS536 User Manual Page 16

Comments to this Manuals

Related products and manuals for Ovens Middleby Marshall Model PS536